Сool edge bits
Redefining drilling with cutting-edge hydraulics and cooling technology
With expertise in thermodynamics and fluid mechanics, Cool Edge Bits has taken the traditional PDC drill bit and reimagined it from the ground up.
Our patented design directs hydraulic flow to the cutters, reducing heat, minimizing wear, and extending performance. Every detail is built for longer life, deeper drilling, and better results. Cool Edge Bits leaves the stars behind, focusing on the new depths that matters most.
Features
A single set cutting structure with backup redundacy for extended longevity.
Diamond-focused hydraulics for improved cutter tip cooling.
Nozzle orientations facilitate chip-braking during initial rock removal.
The medium cone profile and gauge configuration promotes stabile lateral trajectories.
Impact dampeners protect diamond cutters during transitions between interbedded formation layers.
TECHNICAL DATA SHEET
| Product | 5.875 H613 (A241) | 6.250 H613 (A248) | 8.75 H616D (A249) | 12.250 D618D (A250) | 17.500 V816D (A247) |
|---|---|---|---|---|---|
| IADC | S323 | S323 | S323 | S423 | S423 |
| Blade Count | 6 | 6 | 6 | 6 | 8 |
| Face Count | 22 × 13 mm | – | 29 × 16 mm | 50 × 16 mm | 114 × 16 mm |
| Double Row | – | 16 × 16 mm | 16 × 16 mm | 24 × 16 mm | 49 × 16 mm |
| Gauge/Backreamer | 18 × 13 mm | 18 × 13 mm | 18 × 13 mm | 18 × 13 mm | 18 × 13 mm |
| Gauge Length | 2.75 in (69.9 mm) | 2.75 in (69.9 mm) | 4 in (101.6 mm) | 4.5 in (114.3 mm) | 5.0 in (127.0 mm) |
| Makeup Length | 12.0 in (304.8 mm) | 12.0 in (304.8 mm) | 10.4 in (264.2 mm) | 14.0 in (355.6 mm) | 20.0 in (508.0 mm) |
| Junk Slot Area | 7.8 in² (50.4 cm²) | 9.8 in² (63.3 cm²) | 16.0 in² (103.2 cm²) | 43.8 in² (28.3 cm²) | 81.1 in² (523.2 cm²) |
| Nozzle TFA | 1.2 in² (77.4 mm²) | 1.2 in² (77.4 mm²) | 2.4 in² (154.8 mm²) max | 3.25 in² (209.7 mm²) | 5.4 in² (348 mm²) |
| Bit Connection | 3-1/2” API Reg. Pin | 3-1/2” API Reg. Pin | 4-1/2” API Reg. Pin | 6-5/8” API Reg. Pin | 7-5/8” API Reg. Pin |
| WOB | 27,000 lb (12,100 daN) | 27,000 lb (12,100 daN) | 35,000 lb max. (15,600 daN) | 55,000 lb (24,500 daN) | 79,000 lb (35,100 daN) |
| Makeup Torque | 7,750-19,300 ft-lb (10,500-11,500 Nm) | 7,750-19,300 ft-lb (10,500-11,500 Nm) | 16,500-19,300 ft-lb (22,400-26,200 Nm) | 41,000-44,500 ft-lb (55,600-61,600 Nm) | 78,000-80,000 ft-lb (105,700-108,400 Nm) |
| Flow Rate (Max) | 260 gpm (985 lpm) | 260 gpm (985 lpm) | 700 gpm (2,600 lpm) | 925 gpm (3,500 lpm) | 926 gpm (3,500 lpm) |
Interested in our bits
Interested in how our drill bits can benefit your business? Complete the form below and one of our representatives will contact you soon.